Load & Displacement Measurement

Karol-Warner offers a wide range of equipment to measure load and displacement in soil testing. When you’re performing Triaxial Shear Strength, Unconfined Compressive Strength, Mix Design, Consolidation, Direct Shear, or California Bearing Ratio (CBR) tests, Karol-Warner will meet your measurement needs.

Read More...

• Data Readouts accept electrical signals from load cells and displacement transducers and indicate values on a digital display. They feature built-in peak memory hold and tare functions and are enclosed in a sturdy protective case.
• Load Cells use variations in electrical voltages to determine total loads in compression or tension and require a data readout for display.
• Pore Pressure Transducer & Readout is housed in a portable benchtop cabinet allowing for ease of movement around the lab when performing triaxial and flexible wall permeability testing. 
• Load Rings determine loading forces by measuring the physical deformation of an aluminum ring up to 10,000lbf (44.5kN). They include a dial indicator and a calibration datasheet.
• Linear Variable Displacement Transducers are available in ranges from 0.5 to 2in (12.7 to 50.8mm) with a stainless steel actuating shaft. Each has a repeatability of 0.002mm to measure dynamic displacement.
• Digital Dial Indicators are available in a variety of ranges and resolutions. They are accurate to ±1 resolution when measuring from a known standard.
• Mechanical Dial Indicators come in many different ranges for analog measurement of dimensional differences in specimens during loading.
• Two-Channel Readout w/ 2in Displacement Transducer & 10,000lbf Load Cell is a convenient kit that measures loads in tension or compression and displays data.
• Digital Readout with Load Cell is available in five compressive/tensile load capacities integrated with a display calibrated to ± 0.5% of full-scale accuracy.
• Digital Readout with Displacement Transducer is available in different ranges with repeatability of 0.002mm combined with a display calibrated to ± 0.5% of full scale.
• Pore Pressure Transducer with Deairing Block for precise measurement of pore water pressure in the soil sample.